Dodge RAM Soundsystem Activation Antenna Car Radio Adapter Cable Plug

Description

Any applicable import duties, taxes and fees
are not in the item price or the
Shipping costs included.
The buyer is for this
Fees yourself responsible.
Important instructions
!
1. With this adapter, the factory
Bypassed amplifier. The speaker
are directly connected to the retrofit radio
connected.
The loudspeaker connection cable is for this purpose
from radio to amplifier 6m long and must
to be relocated to this.
In the supply line, the necessary turnout
components included.
2. A power and antenna adapter is also included.
However, the ignition + line must be in the car itself
searched and clamped separately, there
No ignition wire on the original radio plug
(factory radio is Can-Bus controlled)
3. Existing steering wheel buttons are not supported!
4. Please take a look at the plug in the car before buying.
It could still be the older one without being beveled
Corners are located in the car. Then ours would
Power adapter does not fit.
Radio adapter
on ISO connector
For
Chrysler / Dodge / Jeep
For vehicles with
factory sound system!
(i.e. with an original, factory-installed
separate amplifier)
suitable for the following vehicles:
Chrysler:
300 from 2008 ->
ASPEN 2008 -> 2009
Grand Voyager (RT) from 2008 ->
Sebring (JS) from 2007 ->
Town & Country from 2008 ->
Voyager from 2008 ->
Dodge:
Caliber from 2009 ->
Avanger 2 from 2007 ->
Charger from 2008 ->
Durango 2008 -> 2009
Grand Caravan from 2007 ->
Journey from 2008 ->
Magnum from 2008 ->
Nitro from 2008>
Ram from 2008 ->
The adapter delivers the following signals:
Zünd +
(must be looked for in the vehicle itself
and be connected)
Duration +
Dimensions -
Loudspeaker signals
Lighting / dimmer line
(must be looked for in the vehicle itself
and be connected)
Antenna cable
Please do not forget that you are going to install
always
another radio bezel and one
Antenna adapter required.
You can find them here in our
Ebay shop under "Accessories".
Visit my ebay shop: acr-hof
Should you have any questions about the product
so write us an Ebay message
or use the phone number or
Mail address below in the
"Legal information of the seller"
>
"complete information"
You can reach us at the following times:
Tuesday - Friday 10 a.m. - 6 p.m.
Saturdays 10 a.m. - 2 p.m.
SET WITH
Any applicable import duties, taxes and fees are not in the item price or the Shipping costs included. The buyer is for this Fees yourself responsible. are directly connected to the retrofit radio The loudspeaker connection cable is for this purpose In the supply line, the necessary turnout 2. A power and antenna adapter is also included. However, the ignition + line must be in the car itself No ignition wire on the original radio plug 3. Existing steering wheel buttons are not supported! 4. Please take a look at the plug in the car before buying. It could still be the older one without being beveled Corners are located in the car. Then ours would (i.e. with an original, factory-installed The adapter delivers the following signals: Please do not forget that you are going to install Should