-40%
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind
Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind

Carbide Tipped Lathe Dead Center PLUS ground sleeve , 60 Degree Point. OD grind

$ 42.24

Availability: 100 in stock
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Brand: Unbranded
  • Center Type: Dead Center
  • Item must be returned within: 14 Days
  • Country/Region of Manufacture: Unknown
  • Return shipping will be paid by: Buyer
  • Point Style: 60 degree, carbide tipped
  • California Prop 65 Warning: WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos
  • Refund will be given as: Money Back
  • Shank Type: Morse Taper
  • Condition: New, but old stock.

    Description

    For sale is a new, but old stock ground Morse taper, carbide tipped dead center; PLUS a ground sleeve to go to a much bigger Morse taper. These are in perfect shape, the old grease will need to be cleaned off before use.
    Not sure what size tapers they are, but the sizes are; The carbide tipped dead center is about .950" diameter on the largest diameter of the Morse taper end, and about .600" at the smallest end, and its about 5" overall length. The carbide tip goes to about .500" diameter on the 60 degree tip. The sleeve is about 1.765" dia on the largest O.D., and about 1.625" on the smallest dia O.D.of the taper. The largest I.D. on the bushing is about .93", and the smallest I.D. is about .800"
    These are for O.D. grinding between centers, or lathe turning.
    Thanks for looking,
    MSC has one about the same size(but no extra sleeve) for about 0, MSC #
    00093633
    Thanks for looking.