-40%

1911 Full-Size Compensator Brake w/ SIDE SLOTS .45acp SS Black Nitride Finish

$ 18.98

Availability: 751 in stock
  • Brand: Punisher Style 1911
  • Country/Region of Manufacture: United States
  • Specific Part: 1911 Compensator Muzzle Brake
  • Refund will be given as: Money Back
  • Condition: New
  • For Gun Make: Colt 1911 1911 Clones
  • MPN: Does Not Apply
  • Return shipping will be paid by: Seller
  • Type: Barrel Parts
  • For Gun Model: 1911
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted

    Description

    1911 Full-Size Government Compensator Muzzle Brake
    "Punisher" Style
    with 3 vertical machined slots in side wall face
    Stainless Steel - Black Nitride Finish
    also you can see this item with engraving on end...
    copy & paste to see listing...
    https://www.ebay.com/itm/303855367948
    We recommend all Punisher Style Compensators be installed by professional gunsmith;
    however, we have included this instructional video to show the proper, easy way to install your compensator.
    https://youtu.be/uAu6lg_k9_U
    LOWEST PRICE ON EBAY!!!
    ***BUY IT NOW***
    ***ONLY .95***
    This is a brand new stainless steel muzzle brake compensator which replaces the barrel bushing and usually installs in less than a minute. Don't waste your valuable time or money on products made from low carbon steel.
    The 1911 compensators produced in our shop are made from Stainless Steel.  Retaining accuracy longer than low carbon steels and other inferior metals. This item will not rust or warp.
    The design is contoured to mimic the front of the slide, and give the appearance of having an extended slide.  The bushing ID. Is .583" +-.0005". In general, this part is machined to fit any 1911 stock or clone pistol that has a barrel OD. between .577"-581".
    Even with a standard, stock size barrel, the part may require some fitting depending on your individual barrel and slide combination, but is machined to spec to fit onto a stock configured 1911.
    THIS PUNISHER STYLE COMPENSATOR IS
    NOT
    MANUFACTURED
    TO FIT THE COMMANDER MODEL 1911!
    CARE& MAINTENANCE INSTRUCTIONS:
    After firing 50 rounds (each time), we strongly suggest you remove the compensator and clean both it and the barrel to remove any residue build up, which can eventually cause your weapon to malfunction. This is considered to be part of the “proper maintenance, care and use of this part. If proper steps are not taken to care and clean this part, continued use of this part on your weapon may result in a damaged part or weapon. We will not and do not refund or replace parts if this is the case.
    We ARE NOT liable for damage caused to this part or your weapon, due to lack of proper maintenance, improper installation of part, or “forced” installation of part on weapon that does not have matching specs. If this part is installed on a weapon that does not have matching specs, all implied warranty/guarantee of a refund or replacement is VOID. We DO NOT AND WILL NO LONGER issue refunds for damaged, altered or misused parts that are returned to us.
    We only accept returns for refunds on undamaged, resalable parts!
    RETURN POLICY:
    Returns will be accepted within 30 days of receipt of item.
    ALL returned items must be in resalable condition.
    Refunds will be issued for items that are returned undamaged, unaltered, and in resalable condition. If the item is returned to us and is found to be altered or damaged, a refund WILL NOT be issued. We DO NOT issue replacements.  If you ordered the wrong finish, we ask that you return the item for a refund and purchase another.
    WILL THIS COMPENSATOR FIT MY WEAPON?
    I HAVE A .....
    Every compensator we machine is the same size with the same specs detailed in this listing (
    ID Is .583" +-.0005 fit any 1911 clone pistol that has a barrel OD between .577"-581")
    , but we can't say the same for every gun.
    Every one of our compensators should fit on 1911 clones with barrel bushing the same specs as our part; however, they will not fit on a bull barrel.
    We advise all buyers in doubt of whether the part will fit their weapon, to go to a gunsmith or local gun shop to confirm that the compensator will fit their weapon before ordering to avoid the cost of having to ship the part back for a refund.
    If your gun is a 1911 clone, and has a barrel bushing but the comp will not fit on your gun, we recommend you take it to your local gunsmith for fitting.
    If you do not wish to have your compensator modified or "fitted",
    we ask that you send it back to us unmodified and in resalable condition (buyer pays shipping for returns)
    and we will refund your purchase price.
    THIS PUNISHER STYLE COMPENSATOR IS
    NOT
    MANUFACTURED
    TO FIT THE COMMANDER MODEL 1911!
    Please make sure the part and your weapon's barrel specs are compatible. If you have a question as to whether it will fit your weapon, please refer to your weapon's barrel specs.
    If you are unsure of your weapon's specs, we recommend taking the weapon to a professional gunsmith or your local gun shop so they can better assist you.
    Support American Jobs!!!
    Check out our feedback on Quality and Delivery!
    MADE IN
    U
    S
    A
    !
    Support American Jobs!!!
    Sorry, NO INTERNATIONAL SHIPPING!
    FAST & FREE SAME DAY SHIPPING
    USPS FIRST CLASS MAIL
    (
    not insured
    )
    Not responsible if lost or damaged during shipping process!!!!
    Orders Placed by 10:00 a.m. CST ships same day!!